Armature Ovens

The Guspro Model BB-45A Armature Stripping Oven follows the proven two burner designs of Guspro's heavy duty "BB" series ovens. Armature windings are heat stripped without removal or damage of the commutator.

The BB-45A has a single swing door and electrically operated roof opening lid for fast, safe vertical loading with the commutator in the down position. A stator grid is included for alternative use in batch heat cleaning stators.

The commutator is protected from heat and kept below 212oF in the lower water cooled chamber.

armature GO45 lid open.png

About

HEAT CLEANING BENEFITS INCLUDE:

Emergency jobs can be processed quickly.
Controlled burnout and commutator cooling protects parts.
Cycle times of 2 to 4 hours minimize job turnaround. Labour is minimized, fuel conserved, and profits increased.

ENVIRONMENTAL APPROVAL

BAYCO by Guspro ovens meet EPS (USA) and Ministry (Canada) air approval standards for emissions.

EFFICIENT POLLUTION CONTROL

Fuel is conserved with the two burner design, as the process chamber benefits from the radiant heat of the oxidizer chamber. The well-insulated primary chamber requires little fuel from its burner after reaching temperature.

SAFE, SIMPLE, AUTOMATIC OPERATION

A programmable controller automatically controls the oven throughout the full cycle without operator attendance. Once load is complete the process controller will automatically shutdown the entire oven.

The adjustable commutator support plate and adjustable upper shaft support frame permits fast setup and easy one-man loading of small or large armatures. Water level control is included for percise adjustment of the commutator cool zone.
 

Structure, Safety, Benefits

Screen Shot 2022-02-17 at 11.41.59 AM.png
Screen Shot 2022-02-17 at 11.47.53 AM.png
CB OVEN_pic 03.jpg

BENEFITS

Heat Cleaning is a safer and more cost effective clean­ing process compared to using abrasive media or harsh solvents. Get rid of the added costs and liability associat­ed with hazardous waste disposal.

OVEN STRUCTURE

Heavy-duty design includes large capacity afterburner and self-supporting stack. Requires no rain cap.

Built with 12 gauge hot rolled steel, 2”x3” steel tubing and ¼”x 3” flat bar framing with 4 layers of protection.

PRODUCT SAFETY

Heat Cleaning does not allow any direct flame impinge­ment with the product. Heat flows evenly throughout the load to bring the product to temperature. Temperatures are accurately controlled to prevent over-heating using Microprocessor-based digital control­lers and redundant over-temperature safeties. Heat rises naturally: our bottom firebox design ensures even heat distribution throughout the load and an efficient cleaning process.

Call 

1-888-648-7776 (Toll Free)

Email 

Follow

  • Facebook
  • LinkedIn